b05/sew&go Ribbon-couching foot
b05/sew&go Ribbon-couching foot
For couching sequin- and satin ribbon. The adjustable guide holds the ribbon in place, preventing it from slipping as it is being sewn on.
Instructions:
Stitch type: zigzag or decorative stitches (sequins: zigzag)
Stitch width: depends on the stitch (sequins: maximum stitch width or wider than sequins)
Stitch length: depends on the stitch (sequins: maximum stitch length)
Trim the ribbon diagonally and insert it through the presser foot opening and pull it backwards under the foot. Sew on the ribbon, sewing a few securing stitches at the beginning and end of the seam.
Different widths of ribbon can be sewn on, depending on which presser foot guide is used (see illustration):
1. 8-10 mm
2. up to 4 mm
3. 5-6 mm
Note: The screw is only for fastening and should not be adjusted.
Sequin tapes up to 6 mm wide can be sewn on using this presser foot. Pull the sequin tape backwards through the lower opening (1) of the presser foot. Sew on the tape, sewing a few securing stitches at the beginning and end of the seam. It is recommended to use a thread that is the same color as the sequins or a transparent thread.
b05/sew&go Ribbon-couching foot
Return Policy + Shipping Info
Return Policy + Shipping Info
Unused yarn, pre-cut fat-quarter bundles and un-opened notions, in their original condition, may be returned or exchanged within 30 days of purchase. We do not cover shipping costs for exchanges.
We offer a full refund within 14 days of purchase and a store credit within 30 days of purchase.
Non-returnable items:
Cut to order fabrics, all books and patterns, gift cards, classes as well as downloadable products. These can be replaced if damaged in shipping.
All "sale" items are also final sale.
