Shopping Cart
Bernette-b05/sew&go 1 Adjustable Ruler Foot-sewing_machine_feet-gather here online

b05/sew&go Adjustable Ruler Foot

$ 84.99 - Usually $ 109.99


Notify Me When Available

This foot allows you to sew along longarm quilting rulers to create decorative quilt designs such as lines, feathers, circles,

This foot allows you to sew along Plexiglas rulers to create decorative quilt designs such as lines, feathers, circles etc. Due to the adjustment dial the height of the foot can be adjusted to match the fabric thickness individually so that the fabric can be moved smoothly and without getting stuck.


  • Lower the feed dog.
  • Attach the slide-on extension table.
  • Raise the needle & the presser foot. 
  • Attach the presser foot.
    • Use a screwdriver and the short presser foot holding screw supplied.
  • Set the needle position to «Center».
  • Select the straight stitch.
  • If possible, set «Needle stop down».
  • Place the fabric beneath the presser foot and lower the presser foot.
  • Adjust the height of the presser foot.
    • To do this, turn the adjusting wheel of the presser foot until the fabric can be moved back and forth under the presser foot sole without difficulty.
  • Thread the needle.
  • Bring the bobbin thread up to the right side of the fabric. Hold the upper and lower threads together.
  • Start quilting with ruler or free-motion quilting.
    • Move the fabric with your hands according to the sewing speed in order to achieve an even stitch length.
If skipped stitches occur, reduce the presser foot height or the sewing speed.

For best results, move the quilt sandwich 3 mm or less per stitch.
For an optimal sewing result, use the straight stitch plate.
For a beautiful stitch formation, use upper and bobbin threads of the same color and thread quality.

bernette b05/sew&go 1 Adjustable Ruler Foot

More bernette
More bernette Presser Feet