Jasika Blazer Pattern

The Blazer is a classic tailored jacket with a semi-fitted shape that will never go out of style. With just the right amount of polish and detail, Jasika is a wardrobe workhorse and a mighty skill builder. Our instructions use modern speed tailoring methods, fusible interfacings, and minimal hand sewing to make tailoring fun and accessible for everyone; make a blazer you'll want to wear forever! 

This jacket is fully lined and features a classic notched collar, single-button closure, back vent, shoulder pads, welt pockets, gorgeous two-piece sleeves, and a flattering shape that skims the curves of the body. Optional details include pocket flaps, topstitching, decorative sleeve cuff buttons, and leather or suede elbow patches.

Skill Level: Advanced

This pattern contains sizes 0-20

SUGGESTED FABRIC

For the jacket body: medium to heavyweight suitings or lightweight coatings with surface texture such as wool melton, wool flannel, crepe and tweed. Velvet, medium-heavy weight cotton, seersucker and linen may also be used. Please note: tightly woven, smooth surfaced suitings like wool gabardine are not recommended since they can be difficult to fuse using an iron.

For the lining: rayon bemberg, charmeuse, crepe de chine, silky cottons like voile

For the pockets: sturdy cotton like shirting, quilting cotton or muslin (1/4 yd / .25m)

YARDAGE REQUIREMENTS (45"/1.14M FABRIC)

Jacket Body
0-8 = 2.5yd / 2.3m, 10-14 = 2.75yd / 2.5m, 16-20 = 3 yd / 2.75m

Lining
0-8 = 1.5yd / 1.4m, 10-20 = 2.25yd / 2m

YARDAGE REQUIREMENTS (58"/1.5M FABRIC)

Jacket Body
0-8 = 1.75yd / 1.6m, 10-14 = 2yd / 1.85m, 16-20 = 2.25yd / 2m

Lining
0-14 = 1.5yd / 1.4m, 16-20 = 1.75yd / 1.6m

ADDITIONAL SUPPLIES

• Fusible weft interfacing (1.5 yd / 1.4m)
• Fusible knit interfacing (1yd / .8m)
• Horsehair canvas (1/4 yd / .25m)
• Polyester thread
• Optional: topstitching thread for collar
• Optional: silk basting thread
• Cotton stay tape 1/4" wide x 2.5 yds / 2.4m
• Shoulder pads - 1/4" - 3/8" thick
• Sleeveheads or lambs wool/cotton batting cut into 2" wide bias strips
• Optional: Leather or suede for elbow patches
• Lapel button: 1 x 3/4" (19mm)
• 1 x clear button 
• Optional: Sleeve buttons: 6 x 5/8" (16mm)
• Marking tool / tailor's chalk
• Handsewing needles & thimble
• Tailors ham and seam roll
• Press cloth (cotton or silk organza)
• Pinking shears
• Point presser or wood clapper
• Steam iron